Filter By:
- 24-Inch & Smaller (41)
- 26-Inch (57)
- 650B (111)
- 29-Inch (128)
- 700c, 27-Inch & 650c (222)
- Fat Bike (4)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels

$925.00
Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all.
Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider.
The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits.
- New Zipp graphics and cosmetic identity that scream speed
- Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
- Lighter weight than its predecessor, making it nimble and fast
- Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire.
- Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road
- 40mm rim depth makes a light and aero wheel in every situation
- Ships with 12mm end caps
- Center Lock rotor interface (lockring included)

$1,600.00
Slippery, record-shattering speed is yours in your next time trial or triathlon with Zipp’s 900 Tubular Disc. Extensive wind-tunnel testing, as well as countless race victories, proves that it excels in all conditions. Zipp's dimpled surface further smooths airflow, while an amazing un-disc-like weight of just 935 grams makes it fast even on hilly courses. Zipp's Carbon Bridge technology weaves Kevlar threads into the rim’s contact surface for improved strength and longevity, while Zipp’s stiff hubs are built on oversize axles for extra stiffness.

$209.99 - $290.00
A new method of attacking the trail is on the horizon and about to take the mountain bike community by storm. PLUS SIZED 3.0 tires provide faster acceleration combined with increased tire patch for superior traction and added cushion. Introducing the SUNringlé Mulefüt 50!
PRODUCT SPECS:
- STR SUNringle Tubeless Ready
- 50mm rim width
- Premium cartridge bearing straight pull hubs
- Quick release front axle 100x15 and 110x15
- Rear axle options: 142x12, 148x12
- Wheelsmith straight pull double butted spokes
- Wheelsmith brass nipples
- 32 hole count
- Weight / Set: 2220g (27.5") 2310g (29")

$38.99
Sta Tru Front Wheel
- Measures 9-inch across, uses a 12-inch tire
- Single Wall Rim
- Hub/Brake Compatibility: Rim Brake
- ISO Diameter: 203 / 12.5-inch
- Front Axle: 5/16-inch x 85mm
- Rim Width (Internal): 24 mm
- Tire Type: Clincher

$31.00
Sta Tru Front Wheel
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 16-inch
- ISO Diameter: 305 / 16-inch
- Front Axle: 3/8-inch x 100mm
- Tire Type: Clincher

$57.99 - $62.49
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 24-inch
- ISO Diameter: 507 / 24-inch BMX
- Valve: Schrader
- Tire Type: Clincher

$225.00
Been eyeing our new Airless-tire-equipped Alibi, but already have a trusty commuting steed? Featuring our Nimbus 700x38C Airless tires, the Alibi Sport Wheelset lets you reap the benefits of Airless tires on your beloved ride. With a 7-/8-/9-speed compatible hub, a machined braking surface, and double-wall rims, you'll spend more time riding and less time doing maintenance.
- Double-wall rims are strong and durable.
- Machined braking surface creates superior stopping power in any condition.
- 7-/8-/9-speed cassette rear hub provides plenty of gearing options for climbing and riding the flats.
- Standard equipment on Alibi Sport bike.
- Quick-release/Alloy hubs w standard cassette body.
- Comes with Nimbus 700x38C Airless tires.
- Rim brake only.
- Perfect for upgrading hybrids to Airless technology.
- Sold as a set.

$2,100.00
The all-rounder of the new DURA-ACE wheel lineup, the C50 is both lighter than the previous C40 model and nearly as aerodynamic as the previous C60. It's a wheelset at home in a wide range of conditions. From time trials to criteriums, on rolling terrain or attempting a personal best, the new C50 is the ideal wheel for spirited road riding.
The perfect blend of low weight and aerodynamic performance, the all-new DURA-ACE C50 features an updated all-carbon tubeless rim and new hub design that drops weight while enhancing rigidity.
- 50 mm height full carbon rim
- Internal rim width: 21 mm
- DIRECT ENGAGEMENT
- Compatible only with Shimano road 12-speed cassette sprockets

$1,400.00
With a shallow-depth aero profile and lively acceleration, the ULTEGRA R8170 C36 wheelset is a climber's delight that delivers performance every road rider will appreciate.
With the speed and efficiency of tubeless tires, the everyday performance of a shallow, aero profile carbon rim, and the convenience of 11 and 12-speed compatibility, the new ULTEGRA R8170 C36 wheelset is an upgrade for any road bike.
- 36 mm height full carbon rim
- Internal rim width: 21 mm
- Shared rim profile with R9200 DURA-ACE wheels
- Improved aerodynamics

$578.99 - $1,500.00
The 29-inch XTR Race wheels offer new UST tubeless, carbon laminated aluminum rims with 20mm internal widths for the lightweight wheelset you need to power both up and down the mountain.
• Carbon laminated aluminum tubeless
• Super lightweight rim, with same durability as aluminum
• 24C rim width
• Front 28, Rear 28 butted spokes
• New lightweight bearing and axle system
• 33g lighter aluminum rear 12mm axle (vs. M988)
• Front axle: 15x100mm thru-axle
• Rear axle: 142x12mm thru-axle

$1,100.00 - $1,125.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that’s where the all-new CLX 50 comes in.
When we set out to create the CLX 50 Disc, we had clear goals in mind—create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, take some aero guidance from the CLX 64, and keep all of the disc brake benefits that we've come to love if we were going to create what we like to call "the unicorn wheel."
Why discs you ask? With our disc-specific rims, we ditch the brake track, making for a stronger, more impact-resistant rim. This way, you get a disc-specific carbon layup that optimizes stiffness, a weight as close to its rim-brake brethren as possible, and incredible brake modulation and power in all conditions.
Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC-machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width.
After finding the optimized rim shape that best supported our svelte weight requirements, we opted to lace the rims to our Aero Flange (AF) hub, via 21 DT Swiss Aerolite spokes, which features the legendary CeramicSpeed bearings. This way you get a complete, superior wheel system—not just a quick rim. And at the end of the day, it all amounts to a 50mm-deep, 1415-gram clincher disc wheelset that's not only ~300 grams lighter than the competition’s similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category.

$1,375.00 - $1,400.00
First came our CLX 64. Then the 32s. And after racking up multiple wins in Grand Tours, Worlds, and everything in between, we knew that our best bet was to take the line to new heights, or well, new depths. We needed to design one wheel that was a true quiver killer. One wheel that had all the aerodynamic benefits of the 64 in a package that climbed like the 32, and that's where the all-new CLX 50 comes in.
When we set out to create the CLX 50 Disc, we had clear goals in mind, create wheels that are 48 to 54mm deep, aerodynamically optimized, ultra-wide, and under 1400 grams. This meant that they'd have to borrow some weight savings techniques that we developed for the CLX 32, take some aero guidance from the CLX 64, and keep all of the disc brake benefits that we've come to love if we were going to create what we like to call "the unicorn wheel." Why discs you ask? With our disc-specific rims, we ditch the brake track making for a stronger, more impact-resistant rim. This way, you get a disc-specific carbon layup that optimizes stiffness, a weight as close to its rim-brake brethren as possible, and incredible brake modulation and power in all conditions.
Even though the CLX 50 is similar in weight to many wheels in the "lightweight" category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CLX 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC-machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width.
After finding the optimized rim shape that best supported our svelte weight requirements, we opted to lace the rims to our Aero Flange (AF) hub, via 24 DT Swiss Aerolite spokes, which features the legendary CeramicSpeed bearings. This way you get a complete, superior wheel system, not just a quick rim. And at the end of the day, it all amounts to a 50mm-deep, 770-gram rear wheel that's not only significantly lighter than the competition's similar depth wheel, but is also measurably faster in every conceivable test than each wheel in its category.
- Assembly Method: Hand-built
- Braking Surface: Disc brake only
- Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve,142x12mm thru-axle, quick-release end caps
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rear Hub: Roval AFD2, Center Lock, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed, quick-release or 142x12mm thru-axle end cap
- Rim Depth: 50mm
- Rim Material: Carbon
- Rim Type: Carbon clincher, 2Bliss Ready
- Rim Width: 20.7mm internal, 29.4mm external
- Spoke Count: 24
- Spoke Pattern: One-cross/Two-cross (2:1)
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 770g

$1,100.00
We believe we've made the fastest all-around road wheels in the world. The Rapide CLX wheelset essentially combines the aerodynamic excellence of our UCI TT World Championship dominating CLX64 with the light weight and gentlemanly handling of our Polkadot-Jersey winning CLX32. The result is a wheelset that delivers maximum speed in conditions found in real-world riding; climbing performance, slippery efficiency of a dedicated aero setup, and stable, confident handling, regardless of wind conditions.
- Assembly Method: Hand-built
- Braking Surface: Disc brake only
- Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty
- Front Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings
- Nipple Type: DT Swiss Pro Lock hexagonal
- Rim Depth: 51mm
- Rim Material: Carbon
- Rim Type: Carbon, clincher (tube-type)
- Rim Width: 21mm internal, 35mm external
- Spoke Count: 18
- Spoke Pattern: Radial/Two-cross (2:1)
- Spoke Type: DT Swiss Aerolite T-head
- Weight: 649g

$1,175.00
Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals.
- Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width
- Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$1,625.00
Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals.
- Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width
- Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub
- Bearing Type: DT Swiss SINC Ceramic Bearings
- Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi)
- Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve)
- Assembly Method: Hand built at every step; from rim layup to the last nipple turn.
- Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

$800.00
The Roval SLX 24 Disc is a no nonsense wheelset. At only around 1515 grams, it's designed for light overall weight, but this doesn't mean that it sacrifices anything to strength or durability. Instead, its 20mm-wide alloy rims work to bolster the aforementioned characteristics, while also providing the optimal tire profile in order to enhance both confidence and feel on the road. Meanwhile, the rims have been built to Roval aero hubs that feature fast-engaging DT 350 star-ratchet internals at the rear. Add it all up, and you get a wheelset that checks all of the boxes for daily training and CX racing—lightweight, stiff, and incredibly reliable.

$1,000.00
Taking the notion of combining flagship performance with workhorse dependability one step further, we're introducing the Terra C. This shares the same hub and spoke architecture as the Terra CL, ensuring ease of service and spoke replacement, should the need arise and is paired with an entirely new rim layup. The rims on the Terra C share the same dimensions and broad range of tire mounting possibilities as the Terra CLX and CL—33mm deep with a 25mm internal width—but are crafted using a new-to-us process known as Resin Transfer Molding. This is an automated process that allows us to very precisely control how resin is introduced to the layup, which in turn ensures maximum strength and material performance. The end result is an incredibly tough set of wheels that you can beat on to hell and back.
- Rim: Terra C RTM Carbon Clincher, 700c, Disc Brake, Tubeless Compatible
- Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm
- Hub: DT Swiss 370 J-bend Center Lock, Ratchet LN 18t internals (20 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub )
- Bearing Type: DT Swiss Sealed Steel Cartridge Bearings
- Spokes: DT Swiss Competition Race J-bend, Front: Radial/Two-cross 24 count, R: 268mm, L: 279mm; Rear: Two-cross 24 count, DS: 277mm NDS: 278mm
- Nipple: DT Swiss Hex Prolock Al 2.0x14mm
- Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi
- Weight: Wheelset 1,610g, Front 719g, Rear 891g (including tubeless rim tape and tubeless valve)
- Assembly Method: Carbon Layup - Automated, Wheel Build - Hand built.
- Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit
- System Weight Limit: 275lbs / 125kg

$1,500.00
650b wheels are notorious for their playful handling, which is why the ultra-wide design of the Roval Traverse SL Fattie 650b wheels are the perfect complement to this style of riding. The reason is behind this simple: Aside from an immaculate, lightweight, and bombproof carbon layup, with a wide, 30mm carbon rim (internal width), these wheels dramatically increase both stability and traction. Ultimately, this all boils down to more control. The extra width also allows for more tire volume, which means more suppleness in the ride quality. And not only this, but the ample width also better supports the tire, meaning that you'll experience less "burping" when riding tubeless. These wheels also include the Roval tubeless plug system, which is an easy and super lightweight solution for tubeless setups. At the front hub, you'll get a thru-axle design with 15/20mm compatibility (end cap options included), and at the rear, the hub features DT Swiss internals for lightening-fast engagement and acceleration. And to top everything off, these wheels are hand-built to ensure a painstaking attention to detail.

$79.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

$79.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

$89.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.
- 25mm external rim width

$90.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and hubs that come out of the box round and true.

$109.00 - $119.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

$129.00 - $139.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

$119.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.
- Cartridge bearing hub with solid axle

$1,500.00
-Built with NOX Skyline 275 rims sporting reflective decals
-Equipped with Project 321 Superboost Rear Hub, 157mmx12mm Axel with 216 Point of Engagement, and Quite Pawls
-Shimano Deore XT 11-46T 11Spd Cassette
-Front wheel has Maxxis High Roller II 27.5x3.00 tires
-Rear wheel has Maxxis Minion DHR II 27.5x2.80 tires
-Both wheels include Shimano SLX 180mm 6-Bolt brake rotor
and have a tubeless setup

$450.00
Engineered with the same spirit of innovation that made Mavic the first to create the mountain bike wheel system, and also the first to introduce the tubeless mountain bike wheel system, this versatile off-road wheelset elevates the trail riding experience. Made with a lightweight aluminum rim that has zero compromises in strength and lateral stiffness, it delivers dependable all-around performance on a variety of trail conditions and terrain.
The rim features our ISM 4D technology to remove unnecessary material and also Fore drilling for the spoke attachment. This minimizes rotational weight, giving them a snappy, dynamic ride quality. The rims are 25mm wide with UST technology, making it easy to experience all the benefits of tubeless tires, including better traction, increased control, and a reduced risk of flats. The wheels are built up with 24 bladed Zicral spokes for lateral stiffness and just enough vertical compliance.
Dynamic and lightweight feel for efficient climbing and added agility
- ISM 4D machining makes the wheel lighter without compromising durability.
- 25mm internal rim width
Proven technologies for performance and durability
- 24 straight-pull bladed Zicral spokes, front and rear
- UST tubeless technology for improved traction and control and reduced risk of punctures
- Fore drilling on the rims
UST Tubeless Ready design gives you total control on challenging terrain
- User-friendly tubeless technology for better traction and control with reduced risk of punctures
- Wheels ship with tubeless rim tape installed.

$550.00
Engineered with the same spirit of innovation that made Mavic the first to create the mountain bike wheel system, and also the first to introduce the tubeless mountain bike wheel system, this versatile off-road wheelset elevates the trail riding experience. Made with a lightweight aluminum rim that has zero compromises in strength and lateral stiffness, it delivers dependable all-around performance on a variety of trail conditions and terrain.
The rim features our ISM 4D technology to remove unnecessary material and also Fore drilling for the spoke attachment. This minimizes rotational weight, giving them a snappy, dynamic ride quality. The rims are 25mm wide with UST technology, making it easy to experience all the benefits of tubeless tires, including better traction, increased control, and a reduced risk of flats. The wheels are built up with 24 bladed Zicral spokes for lateral stiffness and just enough vertical compliance.
Dynamic and lightweight feel for efficient climbing and added agility
- ISM 4D machining makes the wheel lighter without compromising durability.
- 25mm internal rim width
Proven technologies for performance and durability
- 24 straight-pull bladed Zicral spokes, front and rear
- UST tubeless technology for improved traction and control and reduced risk of punctures
- Fore drilling on the rims
UST Tubeless Ready design gives you total control on challenging terrain
- User-friendly tubeless technology for better traction and control with reduced risk of punctures
- Wheels ship with tubeless rim tape installed.

$302.00
Whether you are cutting through mud, dancing on icy, frozen trails or exploring dusty desert roads, you will feel the efficiency of these wheels. CR 1600's are ready to attack the challenges you put in front of them.
- 350 based Spline hub
- Straight-pull hub and spokes are laced 2-cross
- Includes tubeless ready tape and tubeless valve

$405.00
Whether you are cutting through mud, dancing on icy, frozen trails or exploring dusty desert roads, you will feel the efficiency of these wheels. CR 1600's are ready to attack the challenges you put in front of them.
- 350 based Spline hub with 18t ratchet system
- Straight-pull hub and spokes are laced 2-cross
- Includes tubeless ready tape and tubeless valve
Page 1 of 18
Next page